Stainless steel chain conveyor use process need to pay attention to the problem

Stainless steel chain conveyor a common conveying tool, the conveying process of all walks of life, can not be separated from the conveyor, such as chain conveyor, mesh chain conveyor, belt conveyor, etc., all kinds of conveyors need to have some attention in the process of use, in fact, all kinds of conveyor use attention issues are not similar, the use of chain conveyor notes mastered, the other conveyor is also these things.

　　Conveyor acceleration should not be too fast, when you start the conveyor, pay attention to the cycle of gradual, so that the speed slowly move up. Then the gears should not be worn, must be sprocket and chain matching standard, normal operation.

　　The amount of axial movement is one of the main objectives to ensure that the stainless steel chain plate is not running off in the process of transportation. If the axial movement is too large, then the chain plate in the process of transport will present the scene of deviation, or form the cracking of the rollers. Flexibility is to ensure that the stainless steel chain plate conveyor running process to ensure the reduction of resistance, if the flexibility of the rollers can not, then it will lead to the stainless steel chain plate in the use of the process requires greater power to drive, which will form a waste of electricity, and even cause the motor to burn and other scenes. Chain plate conveyor – chain plate is usually made of gray iron or malleable cast iron, usually used to transport hot, sandy materials. When the chain plate conveyor carries particularly corrosive materials, the conveyor plate should be made of corrosion-resistant materials. The shallow conveyor chain plate is only used for conveyors with an inclination of 25 degrees or less, while the deep conveyor chain plate can be used for conveyors with an inclination of 35 degrees or even greater.

　　No matter what kind of conveyor, the conveying process should pay attention to the problems, remember these points will reduce the occurrence of conveyor failure.